2024-08-21 Firmwareversion 2.9.1-b247 für Legacy-Systeme (latest)

Bitte updaten Sie zuerst den Kernel mit der "firmware-kernel.zor"

Führen Sie erst danach das Firmware-Update mit der "didactum-2.9.1-b247.zor" über HTML oder "firmware.zor" über USB durch.

Updates:

• A unique SNMPv3 Engine ID based on the MAC;

• Software shutdown the system;

• Possibility to interrupt LTE when dialing a number;

• Macros %9{id} parameterization;

• Pulse control for “Outlets” and “Dry outputs” tabs;

• Additional information in the “Event log” details - Element ID and Hardware port;

• New macros for notifications;

• Rounding for virtual Math sensor;

• Supervisor for logging of user sessions;

• The possibility of drawing on the map;

• Support SNMP GET v3;

• Support JSON HTTP Request;

• Update DynDNS service scripts;

• Generating self-signed HTTPS certificates directly on the unit;

• Incoming SMS forwarding and SMS commands to emails and phones. Check the SMS bot settings if you use them;

• Modem state elements in "System tree": signal strength, GSM state, LTE state;

• The new "resetusers.vut" tool does not affect other user entries;

• New multi-level map, up to 5 levels. Warning! The old map data will be lost. The map needs to be adjusted again;

• Selecting a TLS version;

• Freezing icons on the map;

• USSD answers in a log;

• A severity level for SNMP Trap notification updated MIB file;

• The page of Dry contacts (if exists) can be chosen as a starting page;

• Daily Mail Log can be sent at the selected time;

• The sampling rate for logging sensors expanded to 3 hours;

• The default thresholds for temperature and humidity sensors have been changed;

• Minor changes in user languages;

• Log-on media extended to 3 years;

• New ON / OFF and OFF / ON icons for user-defined types of Dry inputs;

• Device address support for Modbus TCP virtual sensors;

• Up to 800x600 USB web camera resolution;

• SD card formatting function (FAT32);

• LTE authentication support PAP, CHAP;

• LTE connection log;

• Dashboard templates;

• Support Modbus TCP Wake-On-LAN;

• Refactoring of the outlets' behavior for VT604/VT608 models;

• Traceroute tool;

• Backup of system settings on USB flash drive;

• WebUI update - hide LTE tab if it not supported, more icons for dry contacts, formula type for analog sensors;

• SNMP settings. Check the SNMP settings if you used them, they are disabled by default after the update.

• MIB file update;

• Reading a MAC address using SNMP;

• Sending SMS using SNMP;

• Custom static route to gateway or host;

• Firmware upload process;

• No modem power off in case of long network loss;

• Improved support for USSD message format;

• Modbus TCP reading and writing elements;

• Modbus RTU writing element;

• IMEI code of the modem is displayed;

• Dashboard trigger button;

• Up to 50 unique sensors on the dashboard;

• Copying logical schemes;

• Copying "Math" virtual element;

• Dialing duration;

• Strict email subject;

• Time format 12/24;

• Add line break type for "Web SMS" and "HTTP request";

• Media refactoring, resistance for removal without unmounting;

• Improved LTE, static IP address support;

• Improved CAN bus work;

• Up to 30 sensors for detailed logging;

• Up to 10 min period of detailed sensors polling;

• Operating range of the sensor on the dashboard;

• Email subject supports macro extension;

• Start page selectable;

• CAN bus statistic info;

• Dashboards interface;

• Сameras refactoring;

• Proxying for IP cameras (1 camera only);

• Hysteresis thresholds extended up to 9999;

• The available number of virtual sensors increased;

• User contacts data added;

• SMTP outgoing server default settings added;

• Copy function for notifications, and SNMP GET elements added;

• GPS location support for LTE modems;

• Time synchronization by GPS support;

• Send log files to the FTP server added;

• Notification "HTTP request" added;

• Virtual elements "SNMP Get" refactoring;

• Logic schemes extended - reboot the system;

• Logic schemes extended - actions at the startup system.

Bugs fixed:

• Editing logic schemes containing ‘Modules’;

• FTP backup settings;

• Time setting when “Automatically synchronize time“ is disabled and “Daylight saving time“ is enabled;

• Problems with sending emails on some systems;

• LTE connection stuck;

• CAN humidity sensor limit to 100%;

• Timer monthly mode;

• DynDNS “could not send request“ error;

• Reboot when sending many Web Messages;

• The old backup file is not loaded;

• The map file is not loaded;

• Reset smoke sensors in the web interface;

• Sensor data updating on the map;

• SMS Gate user password with symbol $;

• Web interface dry inputs icons behavior;

• USB camera file saving;

• curl TLS error;

• DNS determination in DHCP mode;

• Establishment of the LTE connection when DHCP is enabled;

• Date in MIB files;

• Loss of dashboard sensors;

• SD card mount error "SD Card is not formatted in FAT32";

• VT608 outlets 5-8 order;

• SNMP v3 settings saving;

• LTE settings saving;

• SNMP GET analog threshold values;

• SNMP GET discrete sensor;

• IP camera URL;

• WebUI sound for alerts;

• OR logic scheme behavior;

• Dialing task test;

• Macro % behavior in messages;

• IMEI on VT700 modem;

• Hanging of the Modbus ТСР sensor;

• Dry contact option "User-defined type" return to "no";

• Download settings;

• Adding elements to the dashboard;

• Device timezone for times with minutes;

• Save settings CAN bus;

• User graphs permissions;

• HTTP/HTTPS mode and port change;

• Monthly and weekly timer;

• Sending notifications to the user without contact (empty phone or e-mail);

• Erasing message text fields;

• Mail sending error;

• Bugs in groups with VT18 dry contact;

• Some minor fixes;

• Cut off the downloaded log file (syslog.txt);

• Unstable work of CAN configuration;

• Unstable work of GSM modem with a large number of SMS;

• Logic schemes modification;

• The "Download current settings" system crashed;

• Unstable work of USB cameras;

• Unstable work of GSM modem;

• The floor map is too small.