
Service firmware recovery in the monitoring system.

settings.zor
    Restore default network settings:
        Enable DHCP: disabled
        IP address: 192.168.0.101
        Network mask: 255.255.255.0
        Gateway: 192.168.0.1
        Primary DNS: 192.168.0.1
        Second DNS: no
        Third DNS: no
        HTTP port: 80
        Enable HTTPS: disabled
        User certificate: replaced by default and not used

time (rename me).zor
    To apply settings via USB - rename the file to "settings.zor".
    Restore default time settings:
        Device timezone: 00:00
        Daylight saving time: off
        Automatically synchronize time: do not synchronize
        Enable NTP server (if supported): disabled

resetusers.zor
    Restore the default Username: guest; Password: guest.
    Does not delete other user entries.

Installing firmware:
  * Via usb-flash: put this firmware file (one only) on usb-flash drive, connect the usb-flash drive to plug on the front panel, after rebooting the system (all the lights go out) remove usb-flash drive;
  * Via the web interface: System menu -> Firmware

WARNING! Attention after the update, you must clear your browser cache.

