
Service firmware recovery in the monitoring system.

factory-settings.vut - restore factory settings of the system:
  * Network settings: ip: 192.168.0.193/24, gw: 192.168.0.1
  * Name: guest; Password: guest;
  * Sensor settings are reset to default;
network-settings.vut - restore default network settings: ip: 192.168.0.193/24, gw: 192.168.0.1
resetusers.vut - restore the default Username: guest; Password: guest;

Installing firmware:
  * Via usb-flash: you must rename the firmware in 'firmware.vut', 'settings.vut' or 'resetusers.vut', put this firmware on usb-flash drive, connect the usb-flash drive to plug on the front panel, after rebooting the system (all the lights go out) remove usb-flash drive;
  * Via the web interface: System menu -> Upload new firmware

Read MD5 sums from the ZIPs and check them:
    md5sum -c *md5
  
WARNING! Attention after the update, you must clear your browser cache.

